The RTI NANO RYGCB 35 show laser projector fulfills highest requirement in terms of brightness, beam divergence and accuracy. The benefits include:

  • 30'500 mW guaranteed output power after optics!
  • despite the high power it is possible to reach a maximum scan speed of >60 kpps@8° ILDA
  • highly sophisticated Coherent OPSL laser modules provide an excellent beam divergence of less than 1.0 mrad for a low beam diameter of only 2.7 mm!
  • an extremely high output power: 5'000 mW / 639 nm red, 5'000 mW / 577 nm yellow, 16'000 mW / 530 nm green, 5'000 mW / 488 nm cyan, and 4'000 mW / 460 nm blue
  • brilliant colors and great color fading
  • newly developed electronics with calibration capability via a browser interface
  • Emergency stop signal can be looped through several RTI NANO systems, which means that one emergency stop is sufficient for all devices
  • quality product, made in Germany
  • Robust and dustproof housing, which also makes it possible to use it outdoors without problems

 

This RTI show laser system is equipped with highly sophisticated Coherent OPSL laser modules. RTI NANO RYGCB 35 has a beam diameter of 2.7 mm and a beam divergence of ca. 1.0 mrad.*
This fact results in an increase of brightness in comparison to diode laser sources. The excellent beam specifications makes this laser projector ideal for graphics projections and long distance projections but also for beam effects, which have to be seen over long distances.
The RTI NANO RYGCB 35 has a guaranteed output power of 30'500mW – full color RYGCB  (5 W / 639 nm red, 5 W / 577 nm yellow, 16 W / 530 nm green, 5 W / 488 nm cyan, 4 W 460 nm blue).

Possible custom configurations: up to 2 sources per color possible! Please ask us!

The RTI NANO RYGCB 35 is equipped with CT-6210H high-speed scanners, which ensure a scan speed of 60 kpps@8° ILDA and a maximum scan angle of 80° (@35 kpps). These devices are therefore suitable for a variety of different applications.

By default, the RTI NANO RYGCB 35 is controlled via ILDA and is equipped with a newly developed electronics with calibration capability via a browser interface. In addition, color and scanner settings and other parameters can be configured directly via the browser application by connecting the laser directly via LAN (W-LAN is also possible with a suitable access point). Thanks to the browser interface, it is no longer necessary to operate the laser projector directly on the device (since this is often mounted at a height of several meters). All configurations can be conveniently done via a computer (PC, MAC, Linux), a tablet or a mobile phone.
Optionally the system can also be operated via LAN, DMX, SD card or in auto mode. W-DMX and a remote control pad are available on request. On the back of the device, there is an 'ILDA-IN' interface as well as an 'ILDA-Through' to loop through the control signal. The emergency stop signal can also be looped through for several RTI NANO laser systems, which means that only one emergency stop is sufficient for all RTI NANO devices connected to one another.

Due to the dustproof housing, the maintenance effort is very low and the device is also suitable for tough touring applications.

The powerful RTI NANO RYGCB 35 is suitable for indoor and outdoor show laser applications at concerts, festivals and other major events. Demanding graphics projections or projections over long distances are possible without any problems.

The RTI NANO RYGCB 35 is a quality product manufactured in Germany.

 

The device can be equipped with CT-6215HP Big Boy Driver scanners and low divergence optics: 60 kpps@8°ILDA, max. 80° (@30 kpps); beam diameter of ca. 5.5 mm and a beam divergence of only 0.6 mm.

 

* depending on the collimators; information based on our recommended standard optics.

Manufacturer:
Ray Technologies
Guaranteed Power After Optics:
30'500 mW
Power Red:
5'000 mW / 639 nm
Power Green:
16'000 mW / 530 nm
Power Blue:
4'000 mW / 460 nm
Power Cyan:
5'000 mW / 488 nm
Power Yellow:
5'000 mW / 577 nm
Laser Class:
4
Beam Specifications (full angle):
CT-6210H + standard optics: ca. 2.7 mm / 1.0 mrad or optionally CT-6215HP + LD optics: ca. 5.5 mm / 0.6 mrad*
Scanner:
CT-6210H Scanner inkl. RTI RayScan driver, 60 kpps@8° ILDA; optional: CT-6215HP Big Boy Driver 60 kpps@8°ILDA, max 80° (@30 kpps)
Scan Angle:
80° max. (@35 kpps)
Laser Source:
Coherent Taipan OPSL
Operation Modes:
ILDA; optional DMX, Auto, LAN, SD-card, W-DMX
Accessories:
Browser interface (integrated), manual, key, power cable; optional: detachable remote control pad incl. patch cable
Power Supply:
85-250 V AC 50/60 Hz
Power Consumption:
1200 W
Dimensions:
773/385/205 mm
Product Weight:
42 kg