• .

  • .

  • .

  • .

Copyright 2020 - The Laserworld Group

The tarm RGB HD show laser projector fulfills highest requirements in terms of brightness, beam divergence and accuracy and offers a guaranteed output power of 9 W. The benefits include:

  • 9'000 mW guaranteed output power
  • a very fast maximum scan speed of 60 kpps@8° ILDA for most demanding graphics projections
  • Coherent Taipan OPSL High Definition modules for an extremely low divergence of only 0.5 mrad (full angle) with a low beam diameter of only 2.7 mm
  • increase of brightness compared to conventional OPSL modules and Diode modules
  • beautiful colors and great color fading
  • TEM00 beam profile for a perfectly round beam
  • newly developed electronics with calibration capability via a browser interface
  • robust and dustproof housing, which also makes it possible to use it outdoors without problems

 

The laser projector is equipped with Coherent Taipan OPSL HD (High Definition) laser modules: 2'500 W / 639 nm OPSL HD, 5'000 W / 530 nm OPSL HD, 2'000 W / 460 nm OPSL HD. Other OPSL setups are also available on request

The tarm RGB HD standard comes with very fast CT-6210H scanners and LAS Turboscan drivers. The scan speed of 60 kpps@8° ILDA and a maximum scan angle of 70° make the system suitable for any kind of application. Optionally this laser system is also available with LD optics.

This tarm show laser system is equipped with Coherent Taipan OPSL and with the newly developed Coherent HD OPSL laser modules with TEM00 beam profile (TEM = Transverse electromagnetic mode) . At TEM00 the brightness of the beam spot is homogenously distriburted in a Gaussian curve, so the spot is perfectly round and has no deviances due to wave interferences.
Besides that, the tarm HD has an extremely low beam divergence: with CT-6210H scanners and standard optics: ca. 0.5 mrad or optional with low divergence optics: <0.25 mrad (TEM00).

This results in an extremely increase of brightness in comparison to 'conventional' OPSL laser modules and especially in comparison to diode laser sources. The excellent beam specifications make this laser system ideal for graphics and long distance projections, but also for beam effects, which shall be visible from far away.

Due to the dustproof housing, the maintenance effort is very low and the device is also suitable for tough touring applications.

The tarm RGB HD is suitable for indoor and outdoor show laser applications at concerts, festivals and other major events. Demanding graphics projections are possible without any problems.

INCLUDING SHOWNET LASER MAINBOARD

The tarm RGB HD is delivered with a ShowNET laser mainboard as standard. This means it has a multitude of control features already built-in: Control via DMX or ArtNET, just like a normal lighting fixture, are possible as well as computer control via ILDA or LAN. Of course the laser can be run in stand alone operation, too. The contents for playback (for DMX, ArtNet, Stand-Alone, etc.) can be fully customized. As the ShowNET laser mainboard comes with a full license of the Showeditor software, it is easy to create custom content for the built-in memory or even directly control the laser with a computer - either live or for creation an playback of complete laser shows.

If ILDA shall be used as control option, like from an external Lasergraph DSP, the internal ShowNET mainboard can also be used as receiver for an IDLA streaming signal - so the externbal ILDA signal can be feeded to an external ShowNET device and this sends the direct control to the tarm RGB HD via ILDA Streaming - so no long ILDA cables are required any more, even with ILDA based control systems.
Manufacturer:
Tarm
Guaranteed Power After Optics:
9'000 mW
Power Red:
2'500 mW / 639 nm OPSL HD
Power Green:
5'000 mW / 530 nm OPSL HD
Power Blue:
2'000 mW / 460 nm OPSL HD
Laser Class:
4
Beam Specifications (full angle):
ca. 2.7 mm / 0.5 mrad CT-6210H
optional ca. 6.0 mm / <0.25 mrad* (LD optics)
Scanner:
CT-6210H with LAS Turboscan (standard optics): 60 kpps@8° ILDA
Scan Angle:
max. 70°
Laser Source:
Coherent Taipan OPSL HD, *TEM00
Operation Modes:
ILDA, DMX, LAN, ArtNet, integrated SD card, stand-alone, master-slave; integrated intelligent ShowNET laser mainboard with display
optional: Pangolin FB4
Accessories:
browser interface for calibration, power cable, manual; full version Showeditor software license included; optional: detachable remote control pad
Power Supply:
85-250V AC 50/60Hz
Power Consumption:
900 W
Dimensions:
371 x 208 x 399 mm
Product Weight:
32 kg



Distributed Brand Laserworld Distributed Brand tarm distributed brand Ray Technologies
Showcontroller logo greyShoweditor laser show software Distributed Brand Garden Star Distributed Brand Pangolin Distributed Brand coherent 

 

Laserworld Ibérica en España Laserworld Ibérica em Portugal Laserworld en Mexico Laserworld India Laserworld 日本 Laserworld 배달 Laserworld w Polsce Laserworld Türkiye
© 2020